Equipment Features
Instructional Placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone.
Weight Stack
Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position.
Upholstery
Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.
Adjustments
No adjustments necessary.
Water Bottle and Accessories Holder
The non-slip drink-and-accessory tray is integrated and features large open, even surface area, easily accessible and easy to keep clean.
Frame and Finish
The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.
Bearings and Pivot Points
Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.
Pulleys and Cables
Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.
Bolt Down Capability Yes
General Features
Diverging axis allows for more natural motion and greater range of motion. Independent, user defined proprietary handles allow for user’s natural movement , supination and pronation through the pulling range of motion. Ergonomically fit handles are slip resistant over molded handles.
Equipment Specifications
Incremental Add-on Weight 5 lbs (2.3 kg)
Standard Shroud Color
Pacific Blue
Black
Dark Cavern
Weight Stack 240 lbs / 109 kg
Standard Upholstery Colors All Spice
American Beauty
Black
Blue Jay
Burgundy
Deep Clay
Grey
Hunter Green
Navy
New Purple
Regal Blue
Slate
Standard Frame Colors
Gloss Metallic Silver
Metallic Ash
Desert Bronze
Black Magic Gloss
Gloss White
Black Pearl
Workout Area (L x W) 77 L x 50 W / 196 L x 127 W
Equipment Dimensions and Weight
Length 77 inches / 196 cm
Width 48 inches / 122 cm
Equipment Weight 561 lbs / 255 kg
Height 59 inches / 150 cm
Shipping Dimensions and Weight
Length 79 inches / 201 cm
Width 47 inches / 120 cm
Height 63 inches / 160 cm
Shipping Weight 578 lbs / 262 kg
Regulatory
EN957 Yes
ASTM Yes