Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
The weight stack is elevated to facilitate user pin selection from seated position.
Upholstery Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.
Adjustable Seat Yes, gas-assisted ratcheting seat adjustment
Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.
Instructional Placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.
Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.
Water Bottle and Accessories Holder The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.
Pulleys and Cables Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.
Frame and Finish The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.
Bolt Down Capability Yes
General Features Dual independent-movement arms feature upper pivots to accommodate arm lengths and can be set to 13 starting positions over a 120-degree range. Weight stack offset to user's right for the most convenient access.
Incremental Add-on Weight 5 lb (2.3 kg)
Standard Shroud Color Pacific Blue
Weight Stack 240 lbs / 109 kg
Standard Upholstery Colors All Spice
Standard Frame Colors
Gloss Metallic Silver
Black Magic Gloss
Workout Area (L x W) 82 L x 82 W inches / 208 L x 208 W cm
Equipment Dimensions and Weight
Length 54 inches / 137 cm
Width 56 inches / 142 cm
Equipment Weight 594 lbs / 269 kg
Height 84 inches / 213 cm
Shipping Dimensions and Weight
Shipping Weight 655 lbs / 297 kg